Give your interior a character and your exterior an attitude
DESCRIPTION
Velvet matt acrylate latex paint resistant to cleaning.
PRODUCT FEATURES
Suitable for interior painting of plaster, concrete, filler treated, brick, cardboard, wooden surfaces, also for card-boarded gypsum board, chipboard and wooden fibre board surfaces. Suitable for new and previously painted surfaces. Not suitable for painting doors or furniture.
RECOMMENDED USES
For painting of ceilings and walls in living rooms, bedrooms and children's rooms, as well as halls and other similar dry premises.
COVERAGE
Absorbent surfaces 7 - 9 m2/l. Non-absorbent surfaces 10 - 12 m2/l.
CALCULATE
DESCRIPTION
Water-borne, matt dispersion paint for interior painting. Very low side sheen.
PRODUCT FEATURES
Suitable for painting of new and already treated concrete, plaster, filler, plasterboard, chipboard and wood fibreboard surfaces according to instructions.
RECOMMENDED USES
Walls and ceilings in dry interior premises, e.g. living rooms, kitchens, offices and public spaces exposed to light wear.
COVERAGE
For absorbing surfaces 5 - 7 m2/l. For non-absorbing surfaces 9 - 11 m2/l.
CALCULATE
DESCRIPTION
Water-borne acrylate coating.
PRODUCT FEATURES
Suitable for new or previously painted concrete, screeded surface, brick, wooden fibreboard, gypsum board or chipboard wall surfaces when a textured coating is desired. TUNTO Fine can also be applied on ceilings.
RECOMMENDED USES
Walls and ceilings in dry interiors
COVERAGE
1 - 9m2/l depending on the painting method as follows:
- thick rolling 1 - 1,5m2/l
- thin rolling 4 - 5 m2/l
- brushing 2 - 2,5m2/l
- thick spatula 2 - 2,5m2/l
- thin spatula 7 - 9m2/l
CALCULATE
DESCRIPTION
Water-borne acrylate coating.
PRODUCT FEATURES
Suitable for new or previously painted concrete, screeded surface, brick, wooden fibreboard, gypsum board or chipboard wall surfaces. TUNTO Coarse can also be applied on ceilings.
RECOMMENDED USES
Walls in dry interiors
COVERAGE
0.5 - 0.7 m2/l. Coverage is determined by the roughness and porosity of the surface, the painting method and painting conditions.
CALCULATE
DESCRIPTION
Waterborne natural stone coating for interior walls.
PRODUCT FEATURES
For new and previously painted concrete, plaster, brick, wood fibre board, gypsum board and chipboard surfaces. Suitable also for humid interiors, but not in direct contact with water.
RECOMMENDED USES
Effect walls in interior premises
COVERAGE
2.5 - 3.5 kg/m2 when applied once with a trowel and 3.5 - 4.5 kg/m2 when applied twice or when sprayed. With one 14 kg package approx. 4 - 5.5 /m2 finished surface can be prepared when applied once and 3 - 4 /m2 when applied twice. The coverage is affected by the coarseness and porosity of the treated surface as well as the application method.
CALCULATE
DESCRIPTION
Water-borne, tintable, acrylate paint for a pearlescent effect.
PRODUCT FEATURES
For interior painting on wooden, wood fibre board, particle board and metallic surfaces and plasterboard (gypsum board), concrete and similar wall surfaces.
RECOMMENDED USES
For use on interior walls, furniture, etc. where a fancy effect is required. Can be used for first-time painting or patching up, and on substrates previously painted with alkyd or catalytic paint, or on lacquered surfaces. Good illumination emphasizes the effect.
COVERAGE
approx. 8 - 12 m2/l (depending on application method).
CALCULATE
DESCRIPTION
Waterborne special lacquer that glows in the dark.
PRODUCT FEATURES
To be used on painted surface. Effect appears best on white/light substrate at total darkness. Requires a sufficiently powerful light intake before dark. Creates a glowing effect for up to 6 hours.
RECOMMENDED USES
Effect painting in dry interior premises. Wall surfaces, also furniture, floors and objects with a protective lacquer. Can be used for marking routes in addition to approved exit path route signs.
COVERAGE
approx. 8 - 12 m2/l (depending on application method).
CALCULATE
© Copyright ED-KEAT LTD. All Rights Reserved.